Written, itemised price before a single wire is touched · (000) 000-0000

Electrician Kenmore WA
(000) 000-0000 Line Up a Free Estimate
Grid of round recessed ceiling lights glowing warm white

Lighting

Lighting Installation & Upgrades in Kenmore

Fixtures placed where the light is needed, on switches that make sense and dimmers that do not buzz.

Plan the lighting — (000) 000-0000

Better Light Is Mostly Better Placement

One fixture in the middle of a kitchen leaves you working in your own shadow. Eight cans on one switch make a living room either glaring or gloomy. The fix is not more light; it is light in the right places, controlled sensibly.

Together we sketch where each fixture should go, then we install it with neat ceiling cuts and switching that matches how you move through the house. LED fixtures are paired with dimmers rated for them, so there is no flicker or hum, and we confirm the circuit can carry the new load before we start. Bigger projects get zones, so one switch sets the room for cooking, reading or winding down.

Thinking about smart switches or app-controlled lighting? We will tell you which systems need a neutral wire in the switch box, which work on older wiring, and which are worth the cost for the rooms you have in mind.

What Lighting Work Covers

From one pendant to a whole-house plan.

Lighting plan

Positions, spacing and switching sketched and agreed before any ceiling is cut.

Recessed fixtures

Slim LED wafers or housings, evenly spaced, with insulation-contact or fire-rated fittings where required.

Pendants and feature fixtures

Boxes rated for the weight, hung at the right height over islands and tables.

Under-cabinet strips

Low-profile LED on a switch or dimmer, drivers hidden out of view.

Exterior lighting

Entry, path and security lights with weather-rated fixtures on protected circuits.

Dimmers and controls

LED-compatible dimmers, three-way switching, timers and occupancy sensors where useful.

LED conversions

Older fixtures and cans converted to LED, often without opening the ceiling.

Neat finish

Fixtures aligned, trim tight to the ceiling, every switch labelled and the packaging and offcuts taken away when we leave.

How a Lighting Job Goes

  1. Walk the rooms

    We talk through how you use each space and mark fixture spots. An itemised price follows.

  2. Install

    Floors and furniture covered, circuits run, fixtures fitted and controls installed. A room usually takes a day or less.

  3. Set and show

    Dimmer ranges tuned, every switch tested, and the controls explained before we leave.

Why People Call Us for Lighting

Drawn before drilled

Spacing and switching settled before any holes.

Quiet, smooth dimming

Fixtures and dimmers matched to avoid flicker.

Clean ceilings

Careful cuts and dust control, which means less patching and painting for you afterwards.

  • Plan agreedBefore cutting.
  • Matched dimmersNo hum or flicker.
  • Covered floorsDust contained.
  • Free estimateIn your home.

Rooms Feeling Dim or Harsh?

Tell us which ones. We will plan the fixtures with you and put the price in writing after a free visit.

Book a lighting visit — (000) 000-0000