Written, itemised price before a single wire is touched · (000) 000-0000

Electrician Kenmore WA
Tangle of colourful electrical cables close up

Whole-Home Rewiring

Whole-Home Rewiring in Kenmore

Outdated circuits surveyed, replaced one zone at a time and brought up to current protection, without moving you out.

Get my wiring surveyed — (000) 000-0000

Signs the Wiring Has Had Its Day

Ungrounded two-slot outlets. Fabric-sheathed wire running across the joists. Aluminum on the branch circuits. Warm switch plates, or a remodel that opened a wall and found splices nobody can explain. Any of these is a reason to look closely, and insurers and home inspectors increasingly ask the same questions.

We start with a survey, not a sales pitch. We test circuits in several rooms, look in the attic and crawlspace and map what is actually there. Sometimes the honest answer is a full rewire. Other times a targeted job, swapping the weakest runs and adding modern protection to key rooms, solves it for less. Either way, you see the findings and get a staged, itemised plan.

Planning to sell, insure or remodel soon? A survey report gives you documented facts about the wiring, which is far more useful in a negotiation or an underwriting conversation than a guess about the age of the house.

What Rewiring Involves

Complete replacement, staged so you can live with it.

Tested survey

Cable type, condition and connections checked across the house, with problem splices noted and photographed.

Zone plan

The house split into sections so only one area loses power at a time.

New grounded cable

Modern copper with a ground conductor replacing old runs, fished through walls wherever access allows.

Current protection

Arc-fault and ground-fault protection added where today's code calls for it.

New boxes and devices

Grounded receptacles and switches in properly secured boxes throughout.

Small, clean openings

Access holes cut deliberately and left neat for the patcher, not whole walls opened up.

Panel capacity check

The panel confirmed for the new circuits, with an upgrade recommended only if it truly cannot cope.

Inspection and directory

Permitted, inspected and finished with a clear, accurate panel directory.

How a Rewire Runs

  1. Survey and findings

    A few hours of testing and looking. You get a written summary of what we found and an itemised, staged plan with options.

  2. Zone by zone

    We work through one section at a time, restoring power at the end of each day where possible. Most houses take one to two weeks.

  3. Sign-off and handover

    After inspection we walk you through the new layout and mark where wall patches need finishing.

Why Homeowners Choose Us for a Rewire

Findings before the price

You see what is in your walls before you commit to anything.

Livable throughout

Staging keeps most of the house powered most of the time.

Partial when partial works

If replacing some circuits solves it, we will tell you.

  • Survey firstTested, not assumed.
  • Zoned workStay in your home.
  • PermittedInspected at the end.
  • New directoryEvery circuit named.

Unsure What Is Behind Your Walls?

Book a survey. We will test what is there, show you the findings and give you a staged plan with a written price.

Book a wiring survey — (000) 000-0000